- Research article
- Open Access
Noise characteristics of the Escherichia colirotary motor
© Clausznitzer and Endres; licensee BioMed Central Ltd. 2011
- Received: 24 March 2011
- Accepted: 27 September 2011
- Published: 27 September 2011
The chemotaxis pathway in the bacterium Escherichia coli allows cells to detect changes in external ligand concentration (e.g. nutrients). The pathway regulates the flagellated rotary motors and hence the cells' swimming behaviour, steering them towards more favourable environments. While the molecular components are well characterised, the motor behaviour measured by tethered cell experiments has been difficult to interpret.
We study the effects of sensing and signalling noise on the motor behaviour. Specifically, we consider fluctuations stemming from ligand concentration, receptor switching between their signalling states, adaptation, modification of proteins by phosphorylation, and motor switching between its two rotational states. We develop a model which includes all signalling steps in the pathway, and discuss a simplified version, which captures the essential features of the full model. We find that the noise characteristics of the motor contain signatures from all these processes, albeit with varying magnitudes.
Our analysis allows us to address how cell-to-cell variation affects motor behaviour and the question of optimal pathway design. A similar comprehensive analysis can be applied to other two-component signalling pathways.
- Power Spectrum
- Methylation Level
- Receptor Complex
- Noise Power Spectrum
- Linear Response Function
Biological systems sense stimuli from their environment using cell-surface receptors, and process this information to make reliable decisions, e.g. where to move, or whether to divide or to express new enzymes. Typically, intracellular signalling molecules are activated by modification, e.g. phosphorylation or methylation, and interact in complicated biochemical reaction networks. The biochemical reactions in such networks rely on probabilistic collisions of a limited number of molecules. Hence, the number of signalling molecules fluctuates with time, making signal processing noisy. The abundance of noise sources in a cell is in stark contrast to the remarkable accuracy with which cells are known to respond to minute amounts of chemical concentration, including growing axons and immune cells [1, 2].
Firstly, what types of signals are transmitted and what types are attenuated by the pathway? Early work showed that the system responds to the time-derivative of the input signal . A number of research groups have measured the averaged response of cells to chemotactic signals [26–28], and found that slowly, as well as rapidly changing input signals are not transmitted by the pathway. The response to slowly changing signals is attenuated by adaptation, which reverses the activation by ligand binding [28–30]. Rapidly changing signals were conjectured to be attenuated by a third-order filter [26, 27]. While the phosphorylation dynamics of CheY-P has been shown to contribute a first-order filter , the exact filtering dynamics of the full pathway has not been addressed.
Secondly, how is noise generated, amplified or filtered in the signalling pathway, and how do different sources of noise affect the motor behaviour? The power spectrum of the motor rotation was measured for wild-type cells and mutant cells lacking the chemotaxis signalling pathway . The spectrum was found to have a large low-frequency component in the wild-type cells, indicating that there is a dominant noise source in the signalling pathway with long correlations. In simulations of the signalling pathway, the adaptation dynamics can play an important role in generating long correlations [16, 31]. However, only signalling up to CheY-P was considered. Other studies include stochastic simulations of the noisy biochemical reactions of the pathway , and addressed the mechanism of motor rotation [33–37], including the thermodynamics of motor switching [38–40]. However, noise generation, filtering and amplification has not been addressed systematically for the various levels of the signalling pathway from chemoreceptors to motors.
Finally, how reliably are concentration input signals transmitted through the pathway in the presence of noise? An important task for the cell is to generate an appropriate motor response to input signals in the presence of fluctuations in the input, as well as due to noise in the biochemical signalling pathway. Furthermore, cell-to-cell variation in protein expression influences signal transmission and noise filtering. Comparing these two aspects of the pathway dynamics, namely chemotactic signal transmission and noise filtering, in close comparison with experimental data along the pathway is a novel perspective in our present study.
In the following, we present a mathematical model for the chemotaxis signalling pathway. A simplified pathway is discussed in the text to provide intuitive understanding. However, results are shown for an extended model for the full pathway provided in the Methods section. We discuss the average (deterministic) response of the signalling pathway to concentration signals. We analyse the noise sources in the signalling pathway and their effects. Finally, we vary pathway parameters and study how they affect signal and noise transmission. We also discuss briefly how our approach can be applied to other two-component systems and signalling pathways.
Experimental measurements of response and noise spectrum
Simplified model for the pathway
Here we consider a simplified pathway to gain intuition of the key processes involved. The simplified pathway consists of chemoreceptor signalling in response to ligand binding and receptor methylation, as well as the rotary motor. Specifically, we use stochastic differential equations in a Langevin approach  to describe the dynamics of each type of signalling protein. We assume throughout that fluctuations in concentration are small, allowing us to describe the average behaviour of a signalling molecule by a deterministic dynamics and the fluctuations around the mean by additive noise.
We assume N receptors form cooperative signalling complexes, which can switch between an active (on) and an inactive (off) state. Their activity A is described by the Monod-Wyman-Changeux (MWC) model [42–47]. The activity depends on the external ligand concentration c at the receptor complex, as well as the methylation level M of the complex as detailed in Methods.
that is the dynamics of the complex activity is affected by changes in the receptor complex methylation level (first term), changes in ligand concentration (second term), as well as fluctuations due to the switching of the complex between its states (last term). All noise terms η(t) introduced in this section are discussed in Methods.
where the first term captures average concentration changes (indicated by angular brackets 〈...〉), affecting all receptors, and the second term describes concentration fluctuations at each receptor complex, assumed to be uncorrelated between different receptor complexes.
The total methylation level M j of a receptor complex j is changed by methylation of receptors in the inactive state by CheR (first term) and demethylation (second term). This latter rate is assumed to be strongly dependent on the receptor complex activity as only active receptors are demethylated by phosphorylated demethylation enzymes CheB-P. These may act cooperatively, in agreement with time course data of wild-type and a CheB adaptation mutant . The last term represents fluctuations due to the noisy processivity of the methylation and demethylation enzymes.
with X the fraction of motors in the CW rotational state and applying the single-motor limit. In Eq. 4, the first term represents the switching from CCW to CW with the transition rate k+, the second term represents switching from CW to CCW with transition rate k-, and the third term describes temporal fluctuations in switching rates due to the stochastic nature of motor switching. Note that the Langevin equation for the two-state motor is exact , see also Additional File 1.
Here, transition rates are modulated by the receptor signalling activity A c , whereas in the full pathway model CheY-P modulates motor switching. These rates have been experimentally measured using signalling mutants expressing varying amounts of constitutively active signalling molecule CheY . The switching rates, including a fit of the model we used  (cf. Methods) to the data, are shown in Figure 3C.
We consider the response to input concentration signals at various levels in the signalling pathway to study how signals are transmitted to the rotary motor (see Methods). Briefly, an input signal Δc(t) is a concentration change relative to a constant background concentration c0, affecting all receptors equally and representing a "meaningful" input to the chemotaxis signalling pathway. Hence, the concentration is given by 〈c(t)〉 = c0 + Δc(t). Furthermore, cells are assumed to be adapted to the pre-stimulus concentration c0 with the various levels R of the signalling pathway adapted to their steady-state values R*.
Analytical results for linear response functions
The receptor activity is a high-pass filter: The magnitude of the response function is small for frequencies ω below ω M = (γ R + 3γ B A*2)∂A/∂M, which is the characteristic frequency due to adaptation. For frequencies above ω M the response function is a constant, given by the number of receptor complexes N C participating in the response, and their sensitivity ∂A/∂c to ligand, evaluated at steady-state. The sensitivity is proportional to the receptor complex size N, i.e. it describes the amplification of the response of a single receptor.
The motor is a low-pass filter, i.e. its dynamics introduces a frequency-dependent response, which is constant below the characteristic frequency of the motor due to the steady-state switching rates and . The parameter ω2 describes the sensitivity of motor switching with respect to changes in receptor activity (Methods). At frequencies above ω X the response is reduced. From Eq. 6 it is obvious that receptors and motor are in a cascade: The motor response introduces a new filter proportional to (ω i - iω)-1 which simply multiplies the response function of the response of the receptor activity. The response functions of the full pathway including the phosphorylation reactions are shown in Additional File 1.
where is the magnitude and ϕ R is the phase of the response function, which characterise the amplitude and lag of the response behind the input signal, respectively.
Figure 3 shows experimental data for the response function, as well as the fits of our full pathway model. Block et al.  and Segall et al.  measured the response of the motor using impulses of attractant. For our fit we adjusted adaptation and motor switching rates. Compared to the data by Shimizu et al.  at the same temperature, adaptation rates are one order of magnitude larger, i.e. adaptation is faster in these experiments. The parameter ω X of the motor switching is 2.1/s, consistent with switching rates of about 1 Hz . It is not clear from where the difference in adaptation rates between the two sets of experiments originates. However, different strains and media can lead to large variations in receptor expression level . Besides different experimental conditions, Shimizu et al.  used populations of cells, whereas measurements by Segall et al.  were done on single cells. For the fit of our model to the data by Shimizu et al. , we adjusted only the adaptation rates, as measurements were restricted to low frequencies. The fit at 32°C yields the same adaptation parameters as obtained from fitting dose-response curves of adapting cells  (Figure 3B, left). The adaptation rates for room temperature are one order of magnitude smaller. Importantly, fitting to the magnitude of the Fourier transformed response yields a good fit for the phase of the response as well (Figure 3B, right). Fitted parameters are given in the Methods.
Signal filtering along the pathway
The receptor activity acts as a high-pass filter, i.e. it transmits high-frequency signals, but not low-frequency signals. As can be seen from our simple model (cf. Eq. 5), this property is due to adaptation, which introduces the time-derivative of the signal Δc(t) up to the characteristic frequency ω M , eliminating the response to slowly changing attractant concentrations. The activity of chemoreceptors is the input to further levels in the pathway. The response of CheA-P is fast, and shows no qualitative difference to the response of receptors in the frequency range shown. In contrast, due to the fast but finite rates of phosphorylation and dephosphorylation, preventing the CheY-P concentration to respond to rapidly changing input signals, the response at the level of CheY is reduced at high frequencies. Similarly, the motor introduces another high-frequency filter due to slow switching between its two states. This additional filter can be deduced from Eq. 6, where the motor response function takes the response of chemoreceptors as input, and additionally introduces a characteristic cut-off frequency ω X due to slow motor switching rates. Hence, the chemotaxis pathway acts as a band-pass filter , which only transmits input signals within a selected frequency range, which is of the order of 1 to 10 s. This time scale corresponds to the average time between two tumbles, allowing sensing of concentration changes during periods of running. As shown in Figure 4, middle the phase tends towards π/2, i.e. a quarter period, at low frequencies. This has been analysed only for the receptor complex activity . This phase difference is due to adaptation and represents the fact that the system takes the time derivative of the stimulus below the characteristic frequency ω M of adaptation. The phase shift of the receptor activity increases to π at high frequencies, indicating that the activity simply follows the output (a negative sign is due to the negative response of the activity to attractant concentration ). The phase at high frequencies for the response of CheA follows the phase of the receptor activity, except for a small increase of the phase shift. In contrast, the phase of CheY and the motor increase significantly beyond π indicating that slow rates of modification and motor switching introduce a lag of the response behind the stimulus.
To understand the noise characteristics of the motor, we consider the noise sources and their transmission in the pathway. Each step in the signalling pathway is essentially probabilistic, hence, noisy: ligand diffusion and binding, receptor switching between its functional on and off states, as well as receptor methylation and demethylation, phosphorylation and dephosphorylation of signalling proteins CheA, CheY and CheB, and switching of the rotary motor between its two states, CW and CCW rotation. To characterise fluctuations of the phosphorylated signalling protein δR(t) around its mean value 〈R(t)〉, we use the power spectrum S R (ω) and the variance 〈δR2〉 = 〈R2(t)〉 - 〈R(t)〉2 (cf. Methods).
Analytical results for noise spectra
In this equation we considered fluctuations from receptor switching (first term in numerator), ligand diffusion (second term), as well as the receptor methylation dynamics (third term) at each of the N C receptor complexes per cell. We have assumed that fluctuations at different receptor complexes are independent. Therefore, we obtain the sum of N C identical spectra for all complexes. The individual terms S a (ω), S c (ω) and Q M are given by Eq. 30, 34 and 36 in Methods. The frequency dependence of the ligand noise, as well as noise from receptor complex switching, indicates filtering of slowly varying fluctuations with frequencies below the characteristic frequency ω M due to adaptation. In contrast, only high-frequency fluctuations from the receptor methylation dynamics are filtered by the adaptation dynamics. This is due to finite rates of methylation and demethylation fluctuations introducing correlations in the receptor methylation level.
The first term represents transmitted noise from receptor complexes, including the noise power spectrum of the receptor activity and the sensitivity of motor switching rates to changes in activity. The second term is motor switching noise. Both noises are filtered by the motor, as its finite rates of switching introduce correlations with characteristic frequency ω X . The noise spectra of the full pathway including the phosphorylation reactions are shown in Additional File 1.
Noise filtering along the pathway
In Figure 4, right we show the power spectrum of fluctuations at the various levels of the signalling pathway, i.e. total receptor activity, CheA-P, CheY-P and the motor. We also plot the individual contributions from processes generating noise, namely ligand diffusion, receptor switching, methylation and demethylation of receptors, and phosphorylation and dephosphorylation of proteins, as well as motor switching. This allows us to follow how noise is generated and transmitted at the various levels of the pathway. The noise spectrum of the receptor activity has its largest contribution at low frequencies, which originates in the receptor methylation and phosphorylation dynamics. Most of the fluctuations from phosphorylation stem from CheB (the separate contributions to the phosphorylation noise are not shown in Figure 4, right). At high-frequencies, the activity noise spectrum is at. This is due to ligand and receptor switching noise, which is removed at low frequencies by adaptation, but not at high-frequencies. The general behaviour of the noise spectrum corresponds to the simplified model (cf. Eq. 8).
The noise spectrum of CheA-P has generally the same shape as the activity spectrum with a large low-frequency component, mainly due to receptor methylation and CheB phosphorylation dynamics. This spectrum also has an almost flat high-frequency behaviour in the frequency range shown. Apart from ligand and receptor switching noise, the flat part of the spectrum is largely determined by fluctuations from CheA autophosphorylation, which has roughly the same shape as activity noise at high frequencies because autophosphorylation depends on the receptor activity.
The noise spectrum of CheY-P is also largest at low frequencies. However, at high frequencies the spectrum falls off as noise is filtered due to the finite rates of CheY phosphorylation and dephosphorylation, which introduce correlations in the fluctuations.
The motor introduces another layer of filtering of transmitted noise with the characteristic motor switching frequency ω X (cf. Eq. 9). Hence, transmitted noise is reduced by two filters in the frequency range shown, namely due to the CheY-P and motor dynamics. However, the main contribution to the spectrum is due to the motor switching itself, which is reduced only by a first-order filter with characteristic frequency ω X .
Cell-to-cell variation of motor behaviour
How are the signal response, fluctuations and the signal-to-noise ratio (SNR) affected by changing parameters of the pathway such as size of receptor complexes, protein concentrations and reaction rate constants? In this section, we discuss the effect of cell-to-cell variation on the power spectrum of the motor. In the next section, we discuss the SNR and its contributions, and how they depend on receptor complex size and adaptation rates.
An increased low-frequency component has been observed in the motor power spectrum for cells with low motor bias . Both, wild-type cells and mutants lacking the signalling pathway were measured. Hence, the mutant's spectrum represents the component to the power spectrum from steady-state motor switching only. Wild-type cells showed a large low-frequency component compared to the mutants. Figure 5B shows that our model can reproduce these experimental data (shown in the Inset), provided we assume a low CCW to CW switching rate leading to small motor bias (see Methods for the details of parameters). Specifically, the low-frequency component of our spectrum originates from noise in the methylation and phosphorylation dynamics in cells with low motor bias. Furthermore, experiments show that the low-frequency component in the motor power spectrum is reduced by increasing the expression level of CheR . In Figure 5C we show that our model reproduces this experimental finding (shown in the Inset). The low-frequency component due to noise from receptor methylation and demethylation is effectively reduced by increasing the methylation rate constant.
Signal-to-noise ratio at the motor
with ΔX2 and 〈δX2〉 defined in Methods. For optimal signalling this ratio should be maximised. For simplicity, we only discuss the receptor activity in the text, while in the figures we additionally show the contribution from phosphorylation processes as transmitted to the motor in the full pathway model.
Optimal receptor complex size
Receptor complexes amplify small signals proportionally to their size N. However, also concentration fluctuations are expected to be amplified. Hence, we hypothesise that the receptor complex size could be optimised to yield a balance of advantageous amplification of signals and detrimental amplification of input noise.
In Figure 6B and 6C, we show the variance (i.e., the integrated noise power spectrum, see Methods) of the transmitted noise of the pathway at the level of the motor. Only the contribution to the variance from ligand diffusion depends on the background concentration. Compared to the signal response, the maximum of the variance is shifted to a slightly lower concentration. The contribution to the variance from switching of receptor complexes is relatively small compared to the other contributions and roughly constant with receptor complex size, whereas those from ligand diffusion, receptor methylation and phosphorylation dynamics increase with receptor complex size.
To understand these behaviours of the variance more intuitively, we analysed the receptor activity analytically (for details of the calculation, see Methods). We find, the contribution to the variance of the receptor activity from receptor switching is indeed constant, independent of N. The contribution from ligand diffusion scales steeply as N2, the difference between ligand noise and ligand signal amplification being due to (i) noise from different complexes is added up incoherently, and (ii) the main contribution to the variance coming from high-frequency ligand noise, which is not filtered by adaptation. The contribution from receptor methylation grows approximately linearly with receptor complex size as a result of the incoherent addition of fluctuations at different receptor complexes and the sensitivity of the receptor complex activity with respect to changes in methylation level increasing proportionally with N. The contribution to the variance from phosphorylation processes grows with receptor complex size similar to the contribution from the methylation dynamics. Overall, the total variance of transmitted noise at the level of the motor has contributions from receptor switching, the dynamics of receptor methylation, and phosphorylation. The latter is approximately constant or grows slower than the amplified signal response, whereas the component from ligand diffusion increases steeper than the signal response with growing receptor complex size.
The resulting SNR, i.e. the ratio of integrated signal response and variance of the noise, is shown in Figure 6D and 6E. The SNR is largest at background concentrations in the sensitivity range of the Tar receptor. Furthermore, due to the different dependencies of the signal and the noise on the receptor complex size, the SNR has a maximum at a particular receptor complex size (Figure 6E). The SNR grows below that complex size due to signal amplification, while the amplified ligand noise from ligand diffusion is still below the internal noise level from receptor switching and receptor methylation and phosphorylation dynamics. Above the optimal receptor complex size, the SNR decreases because the ligand noise is amplified more than the signal.
Optimal adaptation rates
As shown above, adaptation filters slow input signals, with the adaptation speed determining what input frequencies are transmitted by the pathway. Furthermore, the adaptation dynamics filters input noise. Hence, adaptation rates may be expected to be optimised for signal and noise propagation.
The variance of fluctuations is shown in Figure 7C and 7D. The individual contributions from transmitted noise at the level of the motor look qualitatively similar. For γ R and γ B such that the adapted receptor activity is in the steep region of dose-response curves, the variance of transmitted noise is largest. In contrast, for either vanishing γ R or γ B all contributions decrease, consistent with calculations for the variance of the receptor activity in Methods. In these cases, the adapted receptor activity becomes saturated, hence, quenching fluctuations transmitted by receptors.
The resulting SNR is shown in Figure 7E. The SNR increases for vanishing γ R and decreases for vanishing γ B . According to Figure 7E, a large SNR is obtained for small γ R and large γ B , corresponding to the parameters of our model.
Park et al.  presented the idea that the signalling response to concentration signals and fluctuations in the chemotaxis pathway are not independent of each other, because they are produced by the same molecular interactions. Specifically, based on measurements at the level of the motor these authors proposed a fluctuation-response theorem, namely an approximate linear relationship between the adaptation time to step stimuli and the variance of fluctuations in CheY-P concentration.
Biological signalling pathways employ biochemical reaction networks and molecular state transitions to sense and process signals from the environment. Fluctuations inherent in these processes determine the signals which can reliably be transmitted. Here, we studied the signal and noise propagation in the E. coli chemotaxis signalling pathway, which controls the bacterial swimming behaviour in chemical gradients. Specifically, we considered the dynamics of ligand diffusion, receptor methylation and demethylation, receptor complex switching between on and off, phosphorylation and dephosphorylation of the kinase CheA, and response regulators CheY and CheB, as well as from rotary motor switching between CW and CCW direction. We assume cooperative chemoreceptor signalling complexes, whose activities depend on ligand concentrations and receptor methylation level, described by the MWC model [42–47].
We formulated a model which includes all processes in the signalling pathway. Not included is the dynamics of gene expression and enzyme localisation to the chemoreceptor cluster, which is assumed to be much slower than the dynamics of signalling processes (discussed below). To make results intuitive we also presented a simplified version of the model, which only includes the dynamics of the activity of chemoreceptors, ligand concentration and receptor methylation level, as well as the motor dynamics. To calibrate the model, we first collected experimental data sets for the signalling pathway and rotary motor [26–28], and the motor switching behaviour [31, 51]. Using the Fourier transformed linear response function, we subsequently fitted our model parameters. We found a range of parameters fitting different data sets, revealing a striking experimental variation, which may require further characterisation in the future.
Despite the fitting, there is a discrepancy of our response function and the data at large frequencies. Block et al.  and Segall et al.  conjectured that the pathway is a third-order low-pass filter. In contrast, we find that the only relevant filters in that frequency range are due to CheY-P and motor dynamics, leading to only a second-order filter. One explanation for the missing filter is that experimental concentration pulses were not short enough, leaving a signature from the input signal at large frequencies. Alternatively, additional processes such as a slow release of CheY-P from the chemosensory complexes as discussed in Ref.  could lead to an additional filter. However, CheY-P/CheZ complex formation and potential oligomerisation of CheY-P/CheZ complexes [53–55] are not expected to contribute to high-frequency filtering (Additional File 1).
The motor behaviour is the final cell output, which contains characteristic noise signatures of all upstream signalling components, including the receptors. We found that motor switching is the dominant contribution to the spectrum of the fluctuations in motor bias (Figure 5). This may be not surprising as motor switching enables E. coli to tumble and change its swimming direction, and is therefore crucial for its search strategy. However, low-frequency contributions from signalling and adaptation may become more significant for some cells or under certain conditions (Figure 5). Specifically, we predict that due to cell-to-cell variation of protein contents or fast motor switching, these low-frequency components become comparable to motor switching noise. For instance, Korobkova et al.  measured power spectra in cells with low motor bias and found that the low-frequency component is increased compared to mutants lacking the signalling pathway, and that increasing the expression level of CheR decreases the low-frequency component. Our model is able to reproduce these spectra, demonstrating the general applicability of our approach. Long correlations in motor bias may enable subpopulations of cells to swim further without tumbling or to tumble more frequently.
Although chemotaxis is one of many capabilities a cell has and may not be optimised in isolation without the rest of the cell, we speculate the cell aims to maximise the SNR for most efficient signalling and chemotaxis. We found that the SNR is maximised at particular receptor complex sizes similar to values of receptor cooperativity extracted from FRET dose-response curves . In line with the data, the "optimal" complex size increases with external ligand concentration, and hence with receptor methylation level. While our complex sizes appear overestimated, noise from ligand molecules rebinding to the same receptor complex  has not been considered here. This may well increase the noise level from external sources and hence decrease the predicted optimal receptor complex size. Using our model, we also analysed the effect of varying the methylation and demethylation rate constants. We found that a large SNR is obtained for small methylation and large demethylation rate constant, corresponding to our fitted model parameters from FRET dose-response curves .
To describe the noise, the Langevin approximation is expected to work for the phosphorylation and dephosphorylation of the abundant protein CheY. However, its applicability is less clear for receptor signalling due to both extrinsic ligand noise and intrinsic noise from receptor methylation. Furthermore, the switching of the binary motor may constitute relatively large noise. As shown in Additional File 1 the Master equation and Langevin approximation yield the same results for receptor signalling . As for the motor, the Langevin equation is exact . However, we explicitly tested that the statistical properties of the time series obtained for two-state switching and Langevin equation are the same. For constant rates, as well as for noisy rates due to fluctuations in CheY-P concentration, the power spectra obtained for the two processes are the same (Additional File 1). In Additional File 1 we further show that noise terms are indeed sufficiently small that linearisation of the pathway equations is justified.
We presented a comprehensive analysis of signal and noise propagation in the chemotaxis pathway of E. coli. Our full-pathway model allowed us to successfully explain a large variety of experimental data from the literature. However, our work goes beyond E. coli chemotaxis as similar methods can be applied to many other pathways.
Our work may also be applicable to other bacterial chemotaxis pathways, which are often considerably more complex than E. coli's pathway and still need to be understood in detail. For instance, the photosynthetic bacterium Rhodobacter sphaeroides has several homologues of each of the chemotaxis proteins in E. coli . Interestingly, Rhodobacter has two chemotaxis receptor clusters, one polar cluster similar to E. coli and one cytoplasmic cluster, which is thought to sense the metabolic state of the cell. Both clusters need to be present for chemotaxis . The soil bacterium Bacillus subtilis has three adaptation systems : one based on methylation and demethylation of receptors similar to E. coli and two independent of receptor methylation, the CheC/CheD system and the CheV system. Furthermore, in B. subtilis, sensory adaptation is not determined by the level of receptor methylation but the location of methylation sites on the receptors. Hence, our analysis presented here may also help elucidate the design of these pathways and clarify the computational problems these bacteria try to solve.
MWC model for activity of receptor complexes
which is a function of the concentration c present at the receptor complex site and the methylation level M of the receptor complex. The methylation level of a complex is the sum of methylation levels of all receptors in a complex. Here, we consider two receptor types, Tar (indicated by index a) with fraction υ a of receptors in the complex, and Tsr (indicated by index s) with fraction υ s of receptors. Receptors are sensitive to attractant MeAsp with dissociation constants K on and K off in the on and off state, respectively. We use the following parameters for the MWC model for receptor complexes: , , and [44, 47].
Stochastic differential equations for full pathway model
Here, we explicitly include the number of CheB-P (B p ) molecules in the demethylation term, with V cell the cell volume.
with N i the number of molecules of species i in a cell volume. Note, that we neglected the binding of CheY-P to its phosphatase CheZ for simplicity, and describe dephosphorylation of CheY-P by the effective dephosphorylation rate . As shown in Additional File 1 this simplification has no qualitative effect on the response function. The term ηA,pdescribes the noise associated with CheA autophosphorylation. The terms and represent the noise generated in phosphorylation of CheB and CheY by CheA, respectively. The terms and describe the noise associated with dephosphorylation.
where we use experimentally derived switching rates k+ and k- as a function of CheY-P concentration (cf. Figure 3C and below).
Model for motor switching rates
where m coop = 26 is the number of motor subunits, -k B T ln(μ) is the free-energy difference of switching per molecule of CheY-P, and K CCW and K CW are the dissociation constants for binding CheY-P in the CCW and CW state, respectively.
Motor switching rates k+ and k- have been derived experimentally as a function of the concentration of a signalling mutant CheY**, which is constitutively active , as shown in Figure 3C. The cellular concentration of Y** varied as a result of induced expression in cells in which wild-type CheY and other cytoplasmic chemotaxis proteins had been deleted. To obtain the switching rates in terms of CheY-P, rather than signalling mutant CheY**, we rescaled the dissociation constants of CheY binding to the motor such that the switching rates are equal, i.e. CW bias about 1/2, at CheY-P concentration 3.2 μM . We fitted the above model to the experimental data in Figure 3C and the CW bias at 33°  and used the rate constants k+ and k- in our full pathway model (Eq. 17).
Characterisation of signal and noise propagation
Hence, the time course of the response is determined by the convolution of the linear response function and the input signal. The linear response function describes the dynamics of the pathway and the convolution with the input signal represents the fact that the current state of the system is determined by the history of the input signal . Importantly, for a nonlinear system to respond linearly to a stimulus, the input signal has to be small. For the receptor complex activity, a signal is small if the change in ligand concentration is small compared to the apparent dissociation constants for the on and off states. These dissociation constants depend on the background concentration as the system adapts to the background concentration c0, resulting in a particular free-energy difference F*. Thus, the concentration change has to be small compared to and . In this case, the change in free-energy difference due to the concentration change is much smaller than k B T. In Figure 4, the background concentration c0 = 0 and the peak concentration of the impulse is 10-3 mM, compared to and . Hence, the input signal is indeed small.
is also called the frequency-dependent gain . The modulus describes what frequencies of the input signal are transmitted well, and which ones are attenuated.
Typically, finite activation rates of the system limit the response to rapidly changing input signals, i.e. high-frequency signals. In this case, the Fourier transformed linear response functions falls off at high-frequencies, and the system is called a low-pass filter. If low-frequency components of the input signal are filtered out rather than high frequencies, the system is called a high-pass filter. The chemotaxis pathway is a band-pass filter (see Figure 2), filtering out low and high-frequency components.
where the Fourier transform is defined on the finite measurement interval T and the average 〈·〉 is over multiple time series.
Determining the noise intensity
The rates r1 and r2 typically depend on the concentrations of proteins in the signalling network. The noise term η(t) is composed of two terms η1(t) and η2(t), which are associated with the rates r1 and r2, respectively. We assume η1 and η2 to be independent, i.e. 〈η1(t) η2(t')〉 = 0. In general, this is justified as different reactions are catalysed by different proteins. Using 〈η j (t)η j (t')〉 = Q j δ(t - t'), the noise intensities can be calculated if we make the assumption that fluctuations are due to so-called birth and death processes, i.e. creation and destruction of the molecules with average rates and . Then the associated noise intensities are and . The intensity of the total noise η(t) is the sum Q = Q1 + Q2 due to the independence of the two noises. As forward and backward rate are equal at steady state, Q is twice the reaction rate in one direction at steady-state.
This result is due to the Fourier transform of the rate of receptor complex switching da/dt yielding . Hence, the power spectra of a and da/dt differ by a factor ω2 as the power spectrum is proportional to the magnitude squared of the Fourier transform according to Eq. 26.
where k D L is the rate of molecules moving out of the volume by diffusion, and k D times the mean concentration c0 in solution serves as a proxy of the rate of ligand molecules moving into the volume. The noise term η L (t) is assumed to be Gaussian and white, with zero mean and noise intensity Q L = Dsc0.
where s6 is the squared volume given by the dimension of the receptor complex. The zero-frequency limit of the power spectrum of the ligand concentration S c (0) = c0/(Ds), which corresponds to calculations by Berg and Purcell  and Bialek and Setayeshgar  for the uncertainty in sensing ligand concentration.
Motor switching noise
Calculation of response functions
with  the adapted activity of a receptor complex, denoting the adapted activity of individual receptors. In the second equality we have used that at the adapted state . The parameter is the derivative of the motor switching rates with respect to activity, and ω X = k+* + k-* is a characteristic frequency due to motor switching at steady state. ΔA is the response of every receptor signalling complex, and ΔA c = N C ΔA is the activity response of all receptor complexes in a cell. Solving for and , and division by the stimulus yields the response functions in Eq. 5 and 6.
Calculation of noise power spectra
and their power spectrum is given by Eq. 9.
Integrated signal response, variance and SNR
Optimal receptor complex size
where we inserted Eq. 5. Hence, the activity response scales as , where we used that N C = N tot /N with N tot the total number of receptors in a cell.
where we used Q a and inserted Eq. 30 for the power spectrum of receptor switching noise and used that it is almost constant and equal to its zero-frequency value over the integration range. Furthermore, the factor and is the adapted activity of an individual receptor. Hence, according to this simple calculation the contribution to the variance from receptor switching is roughly constant with receptor complex size.
where 〈δc2〉 = c0/(Dsτ) is the variance of the ligand concentration measured during the time interval τ. We used Eq. 34 and the same argument as for the switching noise to calculate the integral. Hence, the contribution to the variance from the ligand diffusion grows as as a result of incoherent addition of noise from different receptor complexes, the sensitivity ∂A/∂c increasing as N2, and the size dependence of receptor complexes s ∝ N1/2.
where we defined , inserted and ω M = ω1(∂A/∂M). Hence, grows approximately linearly with receptor complex size.
The SNR grows linearly with N for small complex sizes, and decreases as N-2 for larger complex sizes, resulting in an optimal medium receptor complex size, in qualitative agreement with Figure 6.
Optimal adaptation rates
and is only a function of the ratio β = γ R /γ B . Expanding the adapted activity around (for γ R → 0) yields , and around (for γ B → 0) yields . Similarly, . Hence, and .
The initial response to concentration changes decreases slower than adaptation times, resulting in an increased signal response for vanishing γ R . For vanishing γ B , the initial response to concentration changes decreases faster than adaptation speed, hence yielding a vanishing signal response. The overall dependence of the integrated signal response is for γ R → 0(γ B → 0). For the contributions to the variance of the receptor activity from receptor switching, ligand diffusion and receptor methylation dynamics we obtain , and , respectively. Hence, according to our simplified model the SNR of the receptor activity goes as , in qualitative agreement with Figure 7.
Numerical integration of different equations of the full model
Only the full pathway model without noise was solved numerically (cf. Figure 4). We used an Euler method to integrate the differential equations 13-17 without noise. As concentration input signal we used a triangular impulse of duration 0.02 s, c0 = 0 and peak concentration 10-3 mM. The integration time step was Δt = 10-3, maximum integration time was 100 s. In each integration step, first the receptor complex activity was calculated according to Eq. 11 based on the current ligand concentration and receptor methylation level from the previous iteration. All other variables x were updated in each time step i according to xi+1 = x i + Δt · rate, where rate is given by the r.h.s. of the differential equations for the respective variable.
Parameters of the full pathway model, including references to literature.
calculated from above
calculated from above
calculated from above
calculated from above
N A,tot = NN C
100 μM-1 s-1
15 μM-1 s-1
adjusted to yield steady-state value
3.14 μM-2 s-1
Intensities of Gaussian white noise terms in the full pathway model.
noise intensity Q i
2γ R (N - A*)
A, Y p
A, B p
Fitting parameters for response function of the full pathway model for Fig. 3.
Parameters for cell-to-cell variation in Fig. 5A.
WT1 (black line)
γ R [s-1]
γ B [μM-2 s-1]
Parameters for cells with low motor bias in Fig. 5B and C.
Y tot [μM]
∂k+/∂Y p [s-1 μM-1]
∂k-/∂Y p [s-1 μM-1]
Parameters for the fluctuation-response theorem in Fig. 8.
varying γ R (solid)
varying γ B (dashed)
varying [Y] tot (dotted)
γ R [s-1]
γ B [s-1]
[Y] tot [μM]
We thank Richard Berry, Martin Buck, Tom Duke and William Ryu for helpful discussions, and Suhail Islam for computational support. RGE was supported by Biotechnological and Biological Sciences Research Council grant BB/G000131/1 and the Centre for Integrative Systems Biology and Bioinformatics (CISBIO) at Imperial College.
- Sykulev Y, Joo M, Vturina I, Tsomides TJ, Eisen HN: Evidence that a Single Peptide MHC Complex on a Target Cell Can Elicit a Cytolytic T Cell Response. Immunity. 1996, 4: 565-571. 10.1016/S1074-7613(00)80483-5.View ArticlePubMedGoogle Scholar
- Mortimer D, Pujic Z, Vaughan T, Thompson AW, Feldner J, Vetter I, Goodhill GJ: Axon guidance by growth-rate modulation. Proc Natl Acad Sci USA. 2010, 107: 5202-5207. 10.1073/pnas.0909254107.PubMed CentralView ArticlePubMedGoogle Scholar
- Elowitz MB, Levine AJ, Siggia ED, Swain PS: Stochastic Gene Expression in a Single Cell. Science. 2002, 297: 1183-1186. 10.1126/science.1070919.View ArticlePubMedGoogle Scholar
- Pedraza JM, van Oudenaarden A: Noise propagation in gene networks. Science. 2005, 307: 1965-1969. 10.1126/science.1109090.View ArticlePubMedGoogle Scholar
- Paulsson J: Models of stochastic gene expression. Phys Life Rev. 2005, 2: 157-175. 10.1016/j.plrev.2005.03.003.View ArticleGoogle Scholar
- Acar M, Pando BF, Arnold FH, Elowitz MB, van Oudenaarden A: A General Mechanism for Network-Dosage Compensation in Gene Circuits. Science. 2010, 329: 1656-1660. 10.1126/science.1190544.PubMed CentralView ArticlePubMedGoogle Scholar
- Eldar A, Elowitz MB: Functional roles for noise in genetic circuits. Nature. 2010, 467: 167-173. 10.1038/nature09326.PubMed CentralView ArticlePubMedGoogle Scholar
- Thattai M, van Oudenaarden A: Attenuation of noise in ultrasensitive signaling cascades. Biophys J. 2002, 82: 2943-2950. 10.1016/S0006-3495(02)75635-X.PubMed CentralView ArticlePubMedGoogle Scholar
- Shibata T, Fujimoto K: Noisy signal amplification in ultrasensitive signal transduction. Proc Natl Acad Sci USA. 2005, 102: 331-336. 10.1073/pnas.0403350102.PubMed CentralView ArticlePubMedGoogle Scholar
- Colman-Lerner A, Gordon A, Serra E, Chin T, Resnekov O, Endy D, Pesce CG, Brent R: Regulated cell-to-cell variation in a cell-fate decision system. Nature. 2005, 437: 699-706. 10.1038/nature03998.View ArticlePubMedGoogle Scholar
- Taylor RJ, Falconnet D, Niemistö A, Ramsey SA, Prinz S, Shmulevich I, Galitski T, Hansen CL: Dynamic analysis of MAPK signaling using a high-throughput microfluidic single-cell imaging platform. Proc Natl Acad Sci USA. 2009, 106: 3758-3763. 10.1073/pnas.0813416106.PubMed CentralView ArticlePubMedGoogle Scholar
- Detwiler PB, Ramanathan S, Sengupta A, Shraiman BI: Engineering aspects of enzymatic signal transduction: photoreceptors in the retina. Biophys J. 2000, 79: 2801-2817. 10.1016/S0006-3495(00)76519-2.PubMed CentralView ArticlePubMedGoogle Scholar
- Hornung G, Barkai N: Noise Propagation and Signaling Sensitivity in Biological Networks: A Role for Positive Feedback. PLoS Comput Biol. 2008, 4: e8-10.1371/journal.pcbi.0040008.PubMed CentralView ArticlePubMedGoogle Scholar
- Lestas I, Vinnicombe G, Paulsson J: Fundamental limits on the suppression of molecular fluctuations. Nature. 2010, 467: 174-178. 10.1038/nature09333.PubMed CentralView ArticlePubMedGoogle Scholar
- Ueda M, Shibata T: Stochastic Signal Processing and Transduction in Chemotactic Response of Eukaryotic Cells. Biophys J. 2007, 93: 11-20. 10.1529/biophysj.106.100263.PubMed CentralView ArticlePubMedGoogle Scholar
- Emonet T, Cluzel P: Relationship between cellular response and behavioral variability in bacterial chemotaxis. Proc Natl Acad Sci USA. 2008, 105: 3304-3309. 10.1073/pnas.0705463105.PubMed CentralView ArticlePubMedGoogle Scholar
- Mehta P, Goyal S, Wingreen NS: A quantitative comparison of sRNA-based and protein-based gene regulation. Mol Syst Biol. 2008, 4: 221-PubMed CentralView ArticlePubMedGoogle Scholar
- Tostevin F, ten Wolde PR: Mutual Information between Input and Output Trajectories of Biochemical Networks. Phys Rev Lett. 2009, 102: 218101-View ArticlePubMedGoogle Scholar
- Mora T, Wingreen NS: Limits of Sensing Temporal Concentration Changes by Single Cells. Phys Rev Lett. 2010, 104: 248101-View ArticlePubMedGoogle Scholar
- Laub MT, Goulian M: Specificity in Two-Component Signal Transduction Pathways. Ann Rev Genet. 2007, 41: 121-145. 10.1146/annurev.genet.41.042007.170548.View ArticlePubMedGoogle Scholar
- Berg HC: Motile behavior of bacteria. Phys Today. 2000, 53: 24-29.View ArticleGoogle Scholar
- Falke JJ, Hazelbauer GL: Transmembrane signaling in bacterial chemoreceptors. Trends Biochem Sci. 2001, 26: 257-265. 10.1016/S0968-0004(00)01770-9.PubMed CentralView ArticlePubMedGoogle Scholar
- Sourjik V: Receptor clustering and signal processing in E. coli chemotaxis. Trends Microbiol. 2004, 12: 569-576. 10.1016/j.tim.2004.10.003.View ArticlePubMedGoogle Scholar
- Wadhams GH, Armitage JP: Making sense of it all: bacterial chemotaxis. Nat Rev Mol Cell Biol. 2004, 5: 1024-1037. 10.1038/nrm1524.View ArticlePubMedGoogle Scholar
- Baker MD, Wolanin PM, Stock JB: Systems biology of bacterial chemotaxis. Curr Opin Microbiol. 2006, 9: 187-192. 10.1016/j.mib.2006.02.007.View ArticlePubMedGoogle Scholar
- Block SM, Segall JE, Berg HC: Impulse responses in bacterial chemotaxis. Cell. 1982, 31: 215-226. 10.1016/0092-8674(82)90421-4.View ArticlePubMedGoogle Scholar
- Segall JE, Block SM, Berg HC: Temporal comparisons in bacterial chemotaxis. Proc Natl Acad Sci USA. 1986, 83: 8987-8991. 10.1073/pnas.83.23.8987.PubMed CentralView ArticlePubMedGoogle Scholar
- Shimizu TS, Tu Y, Berg HC: A modular gradient-sensing network for chemotaxis in Escherichia coli revealed by responses to time-varying stimuli. Mol Syst Biol. 2010, 6: 382-PubMed CentralView ArticlePubMedGoogle Scholar
- Block SM, Segall JE, Berg HC: Adaptation kinetics in bacterial chemotaxis. J Bacteriol. 1983, 154: 312-323.PubMed CentralPubMedGoogle Scholar
- Tu Y, Shimizu TS, Berg HC: Modeling the chemotactic response of Escherichia coli to time-varying stimuli. Proc Natl Acad Sci USA. 2008, 105: 14855-14860. 10.1073/pnas.0807569105.PubMed CentralView ArticlePubMedGoogle Scholar
- Korobkova E, Emonet T, Vilar J, Shimizu T, Cluzel P: From molecular noise to behavioral variability in a single bacterium. Nature. 2004, 428: 574-578. 10.1038/nature02404.View ArticlePubMedGoogle Scholar
- Morton-Firth CJ, Bray D: Predicting temporal fluctuations in an intracellular signalling pathway. J Theor Biol. 1998, 192: 117-128. 10.1006/jtbi.1997.0651.View ArticlePubMedGoogle Scholar
- Xing J, Bai F, Berry R, Oster G: Torque-speed relationship of the bacterial flagellar motor. Proc Natl Acad Sci USA. 2006, 103: 1260-1265. 10.1073/pnas.0507959103.PubMed CentralView ArticlePubMedGoogle Scholar
- Meacci G, Tu Y: Dynamics of the bacterial flagellar motor with multiple stators. Proc Natl Acad Sci USA. 2009, 106: 3746-3751. 10.1073/pnas.0809929106.PubMed CentralView ArticlePubMedGoogle Scholar
- Mora T, Yu H, Sowa Y, Wingreen NS: Steps in the bacterial flagellar motor. PLoS Comput Biol. 2009, 5: e1000540-10.1371/journal.pcbi.1000540.PubMed CentralView ArticlePubMedGoogle Scholar
- Mora T, Yu H, Wingreen NS: Modeling torque versus speed, shot noise, and rotational diffusion of the bacterial flagellar motor. Phys Rev Lett. 2009, 103: 248102-PubMed CentralView ArticlePubMedGoogle Scholar
- van Albada SB, Tănase-Nicola S, ten Wolde PR: The switching dynamics of the bacterial flagellar motor. Mol Syst Biol. 2009, 5: 316-PubMed CentralView ArticlePubMedGoogle Scholar
- Scharf BE, Fahrner KA, Turner L, Berg HC: Control of direction of flagellar rotation in bacterial chemotaxis. Proc Natl Acad Sci USA. 1998, 95: 201-206. 10.1073/pnas.95.1.201.PubMed CentralView ArticlePubMedGoogle Scholar
- Turner L, Samuel AD, Stern AS, Berg HC: Temperature dependence of switching of the bacterial flagellar motor by the protein CheY(13DK106YW). Biophys J. 1999, 77: 597-603. 10.1016/S0006-3495(99)76916-X.PubMed CentralView ArticlePubMedGoogle Scholar
- Tu Y, Grinstein G: How White Noise Generates Power-Law Switching in Bacterial Flagellar Motors. Phys Rev Lett. 2005, 94: 208101-View ArticlePubMedGoogle Scholar
- van Kampen NG: Stochastic processes in physics and chemistry. North Holland. 2007Google Scholar
- Sourjik V, Berg HC: Functional interactions between receptors in bacterial chemotaxis. Nature. 2004, 428: 437-441. 10.1038/nature02406.View ArticlePubMedGoogle Scholar
- Mello BA, Tu Y: An allosteric model for heterogeneous receptor complexes: understanding bacterial chemotaxis responses to multiple stimuli. Proc Natl Acad Sci USA. 2005, 102: 17354-17359. 10.1073/pnas.0506961102.PubMed CentralView ArticlePubMedGoogle Scholar
- Keymer JE, Endres RG, Skoge M, Meir Y, Wingreen NS: Chemosensing in Escherichia coli: two regimes of two-state receptors. Proc Natl Acad Sci USA. 2006, 103: 1786-1791. 10.1073/pnas.0507438103.PubMed CentralView ArticlePubMedGoogle Scholar
- Endres RG, Wingreen NS: Precise adaptation in bacterial chemotaxis through "assistance neighborhoods". Proc Natl Acad Sci USA. 2006, 103: 13040-13044. 10.1073/pnas.0603101103.PubMed CentralView ArticlePubMedGoogle Scholar
- Endres RG, Oleksiuk O, Hansen CH, Meir Y, Sourjik V, Wingreen NS: Variable sizes of Escherichia coli chemoreceptor signaling teams. Mol Syst Biol. 2008, 4: 211-PubMed CentralView ArticlePubMedGoogle Scholar
- Clausznitzer D, Oleksiuk O, Sourjik V, Endres RG: Chemotactic response and adaptation dynamics in Escherichia coli. PLoS Comput Biol. 2010, 6: e1000784-10.1371/journal.pcbi.1000784.PubMed CentralView ArticlePubMedGoogle Scholar
- Stock G, Ghosh K, Dill KA: Maximum Caliber: A variational approach applied to two-state dynamics. J Chem Phys. 2008, 128: 194102-10.1063/1.2918345.PubMed CentralView ArticlePubMedGoogle Scholar
- Li M, Hazelbauer GL: Cellular Stoichiometry of the Components of the Chemotaxis Signaling Complex. J Bacteriol. 2004, 186: 3687-3694. 10.1128/JB.186.12.3687-3694.2004.PubMed CentralView ArticlePubMedGoogle Scholar
- Park H, Pontius W, Guet CC, Marko JF, Emonet T, Cluzel P: Interdependence of behavioural variability and response to small stimuli in bacteria. Nature. 2010, 468: 819-823. 10.1038/nature09551.PubMed CentralView ArticlePubMedGoogle Scholar
- Korobkova E, Emonet T, Park H, Cluzel P: Hidden stochastic nature of a single bacterial motor. Phys Rev Letters. 2006, 96: 58105-View ArticleGoogle Scholar
- Blat Y, Gillespie B, Bren A, Dahlquist FW, Eisenbach M: Regulation of phosphatase activity in bacterial chemotaxis. J Mol Biol. 1998, 284: 1191-1199. 10.1006/jmbi.1998.2224.View ArticlePubMedGoogle Scholar
- Blat Y, Eisenbach M: Oligomerization of the Phosphatase CheZ Upon Interaction with the Phosphorylated Form of CheY. J Biol Chem. 1996, 271: 1226-1231. 10.1074/jbc.271.2.1226.View ArticlePubMedGoogle Scholar
- Blat Y, Eisenbach M: Mutants with Defective Phosphatase Activity Show No Phosphorylation-dependent Oligomerization of CheZ. J Biol Chem. 1996, 271: 1232-1236. 10.1074/jbc.271.2.1232.View ArticlePubMedGoogle Scholar
- Eisenbach M: Bacterial chemotaxis. Chemotaxis. Edited by: Eisenbach M. 2004, Imperial College Press, 53-215.Google Scholar
- Hansen CH, Endres RG, Wingreen NS: Chemotaxis in Escherichia coli: a molecular model for robust precise adaptation. PLoS Comput Biol. 2008, 4: e1-10.1371/journal.pcbi.0040001.PubMed CentralView ArticlePubMedGoogle Scholar
- Bialek W, Setayeshgar S: Physical limits to biochemical signaling. Proc Natl Acad Sci USA. 2005, 102: 10040-10045. 10.1073/pnas.0504321102.PubMed CentralView ArticlePubMedGoogle Scholar
- Aquino G, Clausznitzer D, Tollis S, Endres RG: Optimal receptor-cluster size determined by intrinsic and extrinsic noise. Phys Rev E. 2011, 83: 021914-View ArticleGoogle Scholar
- Sourjik V, Armitage JP: Spatial organization in bacterial chemotaxis. EMBO J. 2010, 29: 2724-2733. 10.1038/emboj.2010.178.PubMed CentralView ArticlePubMedGoogle Scholar
- Hutchings MI, Hong HJ, Buttner MJ: The vancomycin resistance VanRS two-component signal transduction system of Streptomyces coelicolor. Mol Microbiol. 2006, 59: 923-35. 10.1111/j.1365-2958.2005.04953.x.View ArticlePubMedGoogle Scholar
- Henke JM, Bassler BL: Three parallel quorum-sensing systems regulate gene expression in Vibrio harveyi. J Bacteriol. 2004, 186: 6902-6914. 10.1128/JB.186.20.6902-6914.2004.PubMed CentralView ArticlePubMedGoogle Scholar
- Jiang M, Shao W, Perego M, Hoch JA: Multiple histidine kinases regulate entry into stationary phase and sporulation in Bacillus subtilis. Mol Microbiol. 2000, 38: 535-342. 10.1046/j.1365-2958.2000.02148.x.View ArticlePubMedGoogle Scholar
- Porter SL, Wadhams GH, Armitage JP: Rhodobacter sphaeroides: complexity in chemotactic signalling. Trends in Microbiology. 2008, 16: 251-260. 10.1016/j.tim.2008.02.006.View ArticlePubMedGoogle Scholar
- Glekas GD, Cates JR, Cohen TM, Rao C, Ordal GW: Site-specific methylation in Bacillus subtilis chemotaxis: effect of covalent modifications to the chemotaxis receptor McpB. Microbiology. 2011, 157: 56-65. 10.1099/mic.0.044685-0.PubMed CentralView ArticlePubMedGoogle Scholar
- Cluzel P, Surette M, Leibler S: An ultrasensitive bacterial motor revealed by monitoring signaling proteins in single cells. Science. 2000, 287: 1652-1655. 10.1126/science.287.5458.1652.View ArticlePubMedGoogle Scholar
- Kubo R: Statistical Mechanical Theory of Irreversible Processes I. Journal of the Physical Society of Japan. 1957, 12: 570-586. 10.1143/JPSJ.12.570.View ArticleGoogle Scholar
- Stratonovich R: Topics in the Theory of Random Noise, Volume I. 1963, New York: Gordon and BreachGoogle Scholar
- Endres RG, Wingreen NS: Accuracy of direct gradient sensing by cell-surface receptors. Prog Biophys Mol Biol. 2009, 100: 33-39. 10.1016/j.pbiomolbio.2009.06.002.View ArticlePubMedGoogle Scholar
- Hazelbauer GL: Bacterial chemoreceptors. Curr Opin Struct Biol. 1992, 2: 505-510. 10.1016/0959-440X(92)90079-M.View ArticleGoogle Scholar
- Berg HC: Random Walks in Biology. Princeton University Press, Princeton 1993 chap. Diffusion: Macroscopic TheoryGoogle Scholar
- Berg HC, Purcell EM: Physics of chemoreception. Biophys J. 1977, 20: 193-219. 10.1016/S0006-3495(77)85544-6.PubMed CentralView ArticlePubMedGoogle Scholar
- Sourjik V, Berg HC: Receptor sensitivity in bacterial chemotaxis. Proc Natl Acad Sci USA. 2002, 99: 123-127. 10.1073/pnas.011589998.PubMed CentralView ArticlePubMedGoogle Scholar
- Sourjik V, Berg HC: Binding of the Escherichia coli response regulator CheY to its target measured in vivo by fluorescence resonance energy transfer. Proc Natl Acad Sci USA. 2002, 99: 12669-12674. 10.1073/pnas.192463199.PubMed CentralView ArticlePubMedGoogle Scholar
- Shapovalov G, Lester HA: Gating Transitions in Bacterial Ion Channels Measured at 3 us Resolution. J Gen Phys. 2004, 124: 151-161. 10.1085/jgp.200409087.View ArticleGoogle Scholar
- Wolanin PM, Baker MD, Francis NR, Thomas DR, DeRosier DJ, Stock JB: Self-assembly of receptor/signaling complexes in bacterial chemotaxis. Proc Natl Acad Sci USA. 2006, 103: 14313-14318. 10.1073/pnas.0606350103.PubMed CentralView ArticlePubMedGoogle Scholar
- Stewart RC, Jahreis K, Parkinson JS: Rapid phosphotransfer to CheY from a CheA protein lacking the CheY-binding domain. Biochemistry. 2000, 39: 13157-13165. 10.1021/bi001100k.View ArticlePubMedGoogle Scholar
- Bray D, Bourret RB: Computer analysis of the binding reactions leading to a transmembrane receptor-linked multiprotein complex involved in bacterial chemotaxis. Mol Biol Cell. 1995, 6: 1367-1380.PubMed CentralView ArticlePubMedGoogle Scholar
- Stewart RC: Activating and inhibitory mutations in the regulatory domains of the methylesterase in bacterial chemotaxis. J Biol Chem. 1993, 268: 1921-1930.PubMedGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.